Method of application
Surface preparation
Make sure dust, dirt and foreign matter are cleaned away. Ridges and oil should be removed from the form. When applying filler to old painted surfaces, first wash with soda/water solution, rinse and allow to dry before filling.
To stabilize a surface that shows signs of dust or peeling, the use of penetrating primer is recommended.
Application:
Apply the filler in a thin layer and smooth it over; if the area being repaired requires a thick layer, apply several thin layers, allowing each layer to dry before adding the next. Lightly sand the final dry surface before painting, preferably within 9 hours of application.
Clean tools and equipment with water after use.
